Fits in Current Engine Architecture
Scalable for 30 to 1,000-bar fuel systems
The injector’s efficient magnetic design provides excellent feedback for unprecedented fuel control. It significantly reduces over-fueling during the injection-opening event by employing a unique armature solution.
In addition, its variable valve body diameter allows for tighter packaging
and the power group’s modular construction enables fast and efficient changeovers between various connector designs.
广泛的应用范围
高效的性能
灵活的设计
Unique Features
HPDI Injectors
- Efficient magnetic design allows for excellent ballistic control and magnetic feedback
- Armature-stop design reduces over-fueling during the injection opening event
- Valve body diameter meets tighter engine packaging requirements
- The power group’s modular construction enables fast and efficient changeovers between various connector designs
Hover over or click/tap a feature in the list to see it highlighted on the product image!
设计和规格
GENERAL |
REQUIREMENTS |
|---|---|
| Pmax | Up to 1,000 Bar |
| Operating Pressure | 30 to 1,000 Bar |
| Static Flow @ 100 Bar | Up to 20 g/s |
| Static Flow Tolerance | +/- 4% |
| Dynamic Flow Tolerance | +/- 6% at Ti = 1.5 ms |
| Leakage @ 100 Bar | < 1.5 mm3/min |
| Minimum Time Between Injections | 350 μsec |
| Multiple Injections | 4 |
| MFM Minimum Fuel Mass @ 100 Bar w/n-Heptane | 1.5 mg +/- 15% |
| Spray Angle Single Stream | 8 to 20° |
| Spray Type | Multi hole |
| Overall Spray Angle | 80 to 130° |
| Operating Temperature | -40 to 130 ° C |
| Body Diameter | 21 mm |
| Length | 87 shown, customer driven |
| Tip Diameter | 6 mm |
| Inlet Cup Diameter | 9.4 mm, customer driven |
ELECTRICAL |
REQUIREMENTS |
|---|---|
| Boost Voltage | 65 V |
| Boost time | 480 μs |
| Hold Current | 3.5 A |
| Resistance | 1.5 ohms |
| Supply Voltage | 12-14 V |